Before my bicycle arrived, I knew that need a stem exchange.When I reproduce a geometry of CAAD10 using a positional conditioner at a store, my hands don't reach the handle.(^^;)An original stem was 100mm. But it was even 80 mm shorter and was in the state I have to do.The depth and height size of my shirt is 20 mm also shorter than the standard.The one installed actually is the one of 70mm. A bicycle could be controlled now with this. The positional adjustment is important.
I'm standing using the "display stand DS520" of Minoura at a garage. It's for the first time, so the bicycle which doesn't have a stand is difficult to handle, isn't it? I made the pedal the extended location of the seat stay and took a picture as it was warned Mr. grahampenguin on. I have already doctored already some points, and that's advancing everyone towards the clumsy direction, so I apologize for that. It's but to take it safely comfortably. I'll speak a little.
I am using CATEYE TL-AU200 whose a rear light, it is very common. Since the reflector is attached, the merit of this product is being able to remove the original reflector. It cannot remove, unless it is attached. It is because the bicycle which runs a public road must be equipped with a headlight, a bell, and a rear light reflector (red) in Japan. An electric formula rear light is treated as auxiliary light, and when it is made to blink, it is completely auxiliary light.Although it seems that it is generally tolerated, if an accident is caused, it will become disadvantageous with a responsibility ratio. If the reflector is attached, there is no such thing.
The delicate curve of sheet stay of CANNONDALE can be seen with the upper photograph. It is called "SAVE", it carries out and is suppressing the vibration to a saddle.I did not believe the effect. However, an effect is known, if it rides and a long distance run. A degree of comfort completely differs from Escape RX3. Someone say that intensity is weak. It will understand, if it will apply from now on. The technology in which strong to all the things does not exist.
I changed the pedal made of the original resin into LU-C-19 of WELLGO. Although this pedal is carrying out very ordinary appearance, it is light at integral moulding of aluminum, and it is 292g in a pair.The vertical length is long and an axis operates with a sneaker by a square shape, it is easy to break in this pedal. Furthermore, It was using the shield bearing and I think that it is reliable.
A saddle like a lower photograph is attached to Quick4. The design is unified and, as for it, performance is also good. However, as for me, to a limit about 30 km, feels the pain of the feeling to which it is likely to be come to light into two. MSD-100 of SERFAS, it is set to about 50 km. It is as the doctor is designing truly. It has succeeded from ORDINA E3.
At the same time as I contracted the handlebar, changed the grip to "ERGON GS2." This grip is the design which the grip, the end bar, and the palm rest are unifying, and it is easy to grasp it. A material is also not rubber but made from glass fiber. This product is light and there is intensity. It excels very much.
I reduced the handlebar. This handlebar had a length of 640 mm. Although there is no problem in the United States, in Japan to 600 mm that it can go in to a sidewalk.If the indicator of a gear puts until it touches a handle, as for about 20mm+α of one side. Since it was aluminum, I cut off simply by the grinder. But it is still broad. (^^;)
【 SONY α-900 】 ‐世界最強の長焦点レンズと言えばカールツァイスのプラナー85mm/F1.4なんですが、今、これを一番便利に使うならばα900が最右翼。AFが効きます。フルサイズフォーマットですから玉の強さに負けないハコはこれしかありません。SONYの態勢に不安がないわけではなく、彼らはピュアな光学ファインダーを捨てる見込みです。この100％ファインダーは超優秀なファインダーなのですが後継機では続かないというアナウンスが既に出ているのです。それが解ったとたん900の市場価格が上がりました。日本のコンシューマーは馬鹿ではないようです(^^)。本当に900のファインダーは捨てるには惜しいです。こう思うのは年を取ったからなのか。若い人たちはそう感じないのか？後継機が出ると、その答えも出ることになるでしょう。。。